• Cisco USC8738-A24-K9 Universal Small Cell 8738 Band 2/4

    Key FeaturesManufacturer Part Number: USC8738-A24-K9Antenna Gain: 2 dBiHeight: 2.1″Width: 9.4″Depth: 8.1″Weight (Approximate): 3.02 lbPackage Contents: Universal Small Cell 8738 Band 2/4 Mounting Hardware Device Supported: Wireless Access PointLimited Warranty: 1 YearPackage Contents Universal Small Cell 8738 Band 2/4 Mounting Hardware OverviewAs the demand for mobile broadband accelerates, mobile network operators need to use both 3G and LTE technologies efficiently, without creating new network complexity. The Cisco USC 8738 addresses this need by integrating multiaccess technology into a single small cell to support concurrent 3G and LTE operation with SON capability. The Cisco USC 8000 Series offers mobile operators transparent and fully coordinated mobile coverage for environments where the macro network cannot do so cost-effectively by using a single, high-density, multitechnology controller for management and autoconfiguration of the in-building system. These locations range from venues for indoor events with high data requirements to large enterprises in high-density urban areas.

    $2,326.95
  • Cisco AIR-RM3000ACAK910= Aironet Access Point Module for 802.11ac

    Key FeaturesManufacturer Part Number: AIR-RM3000ACAK910=Wireless LAN: YesWireless LAN Standard: IEEE 802.11acAntenna Gain: 5 dBiISM Band: NoUNII Band: YesWireless Transmission Speed: 1300 Mbit/sHeight: 2″Width: 8.5″Depth: 2.5″Weight (Approximate): 1 lbDevice Supported: Access PointOverviewTaking advantage of the flexible, modular design ofthe Cisco Aironet reg;3600 Series Access Point, theCisco reg;802.11ac Module delivers the industry’s firstenterprise-class implementation of next-generationWi-Fi connectivity, as defined by the IEEE802.11ac Wave 1 draft specification. Delivering up to three times the maximum data rate of today’s high-end, enterprise 802.11n access points, the Wi-Fi Alliance trade; (WFA) Certified 802.11ac Module provides enterprise networks with more reliability and superior performance by supporting up to three spatial-stream and 80-MHz-wide channels for a maximum data rate of 1.3 Gbps. 802.11ac with 3×3 multiple-input multiple-output (MIMO) technology, with three spatial streams, which sustains 1.3Gbps rates over a greater range for more capacity and reliability than competing access points With the Dynamic Channel usage 802.11ac can utilize an 80-MHz-wide channel and dynamically contract in real-time based on network characteristics The module provides MIMO-equalization-optimized uplink performance and reliability by minimizing the impact of signal fade 256 Quadrature Amplitude Modulation (QAM) providing a 30 percent more efficient use of the wireless spectrum Cisco CleanAir reg; technology, providing proactive, high-speed spectrum intelligence to combat performance problems due to wireless interference Explicit Compressed Beam forming (ECBF) technology option to improve performance in both directions (when the 802.11ac device also supports ECBF) including one-, two-, and three-spatial-stream devices on 802.11ac while improving battery life on mobile devices such as smartphones and tablets The innovative modular design allows any existing Cisco Aironet 3600 Series Access Points to be field-upgraded and immediately expand the available bandwidth for new 802.11ac devices while supporting all your traditional wireless devices on 802.11a/b/g/n. This flexibility allows companies to grow their network bandwidth dynamically as it is needed, whether for pervasive coverage or spot coverage based on the high-bandwidth demands of their user base-for example, areas of high user congregation such as libraries, cafeterias, auditoriums. Companies have full control for how, where, and when to expand their wireless network.

    $1,737.50
  • Cisco GRWIC-4G-LTE-V= Connected Grid 2G/3G/4G Multimode LTE GRWIC for Verizon Wireless

    Key FeaturesManufacturer Part Number: GRWIC-4G-LTE-V=Height: 2.5″Width: 3″Depth: 7.8″Weight (Approximate): 14.40 ozOverviewThe Cisco reg; Connected Grid portfolio of solutions is designed specifically for the harsh, rugged environments often found in the energy and utility industries. These solutions include the Cisco 2010 Connected Grid Router (CGR 2010), which is designed to support the communications infrastructure needs of the energy delivery infrastructure across the generation, transmission, and distribution sectors. Designed for highly secure, reliable, and scalable infrastructure, the CGR 2010 is an ideal platform to support Smart Grid and other energy delivery infrastructure needs of customers. The CGR 2010 has been extensively tested to meet the challenging substation compliance standards, including IEEE 1613 and IEC 61850-3. The CGR 2010 offers four module slots to utilize Grid Router WAN Interface Cards (GRWIC). These modules allow for WAN connectivity to both legacy networks such as ISDN, DSL, Serial, etc., as well as new WAN technologies such as 4G Long Term Evolution (LTE).Product OverviewThe Cisco Connected Grid 2G/3G/4G Multimode LTE GRWIC modules are designed for use with the Cisco 2010 Connected Grid Router (CGR 2010). These GRWICs provide second-generation (2G), third-generation (3G), and now fourth-generation (4G) cellular technologies and are backwards-compatible with the older technology. Suitable as both a primary and secondary WAN connection, these GRWICs support the latest 4G standards (3GPP Release 8 LTE) as well as 3GPP and 3GPP2-based 3G and 2G access technologies, and transparent handoff from 2G/3G to 4G LTE.These GRWICs support the 3GPP2 technologies of Code Division Multiple Access (CDMA) such as CDMA 1xRTT, Evolution-Data Optimized, or EVDO Rev 0 and Rev A. They also support the 3GPP technologies of the Global System for Mobile Communications (GSM) and Universal Mobile Telecommunications Systems (UMTS) such as GSM, EDGE or Enhanced Data Rates for Global Evolution, GPRS or General Packet Radio Service, high-speed packet access (HSPA) which included High-Speed Uplink Packet Access (HSUPA), and High-Speed Downlink Packet Access (HSDPA). In addition, the new LTE 4G technology is supported.

    $1,154.68
  • Cisco NIM-4G-LTE-GA LTE 2.0 4G NIM for Global

    Key FeaturesManufacturer Part Number: NIM-4G-LTE-GAWireless Transmission Speed: 100 Mbit/sHeight: 1.3″Width: 3.5″Depth: 7.3″Weight (Approximate): 9.50 ozDevice Supported: RouterOverview4G LTE can provide either primary connectivity or backup communications, offering network resiliency for business continuity. With greater agility and speed to deployment than wired solutions, 4G LTE can reduce network cost, and it complements wireline public and private network access. Practical applications of 4G LTE for organizations include parallel networks, primary connection, failover, in-vehicle connectivity, network convergence, and last-mile diversity. The 4G LTE NIM with the Cisco 4000 series Integrated Services Router leads the industry in bringing enterprise grade functions such as Quality of Service (QoS), Multi-Virtual Route Forwarding (Multi-VRF) , advanced VPN, and Unified Communications solutions over LTE.

    $941.32
  • Cisco EHWIC-4G-LTE-ST= Wireless Module

    Key FeaturesManufacturer Part Number: EHWIC-4G-LTE-ST=Host Interface: Mini PCIPackage Contents: EHWIC-4G-LTE-ST= Wireless Module Dual 4G-LTE-ANTM-D and dual extender 4G-AE010-R Device Supported: RouterLimited Warranty: 90 DayPackage Contents EHWIC-4G-LTE-ST= Wireless Module Dual 4G-LTE-ANTM-D and dual extender 4G-AE010-R OverviewEHWIC-4G-LTE-ST and EHWIC-4G-LTE-VZ: Multimode LTE for carriers that operates LTE on 700-MHz (band 13), 1700/2100-MHz (band 4 AWS), extended PCS 1900-MHz (band 25); the multimode EHWICs are backward compatible with EVDO A/CDMA 1X BC0, BC1, BC10.

    $924.60
  • Cisco CGM-WIMAX-1.4GHZ Connected Grid Module – IEEE 802.16e WiMAX 1.4 GHz

    Key FeaturesManufacturer Part Number: CGM-WIMAX-1.4GHZHeight: 1.5″Width: 4.2″Depth: 5.3″Weight (Approximate): 8 ozDevice Supported: RouterOverviewThe Cisco reg; Connected Grid Modules for CGR 1000 Series-WiMAX (WiMAX Modules) provide IEEE 802.16e-compliant WiMAX wireless WAN connectivity for the Cisco 1000 Series Connected Grid Routers (CGR 1000 Series). The WiMAX Modules can enable a standards-based private network solution with high-speed and low-latency WiMAX connectivity to your field infrastructure for multiple applications. Examples include Advanced Metering Infrastructure (AMI), Distribution Automation (DA), Integration of Distributed Energy Resources (DER), and Remote Workforce Automation. The ruggedized WiMAX modules and the CGR 1000 Series provide a versatile communications platform for diverse sets of field are a network (FAN) and Internet of Things (IoT) deployments.

    $869.28
  • Cisco NIM-4G-LTE-NA Wireless Module

    Key FeaturesManufacturer Part Number: NIM-4G-LTE-NAHeight: 1.3″Width: 3.5″Depth: 7.3″Weight (Approximate): 9.52 ozDevice Supported: RouterLimited Warranty: 90 Day

    $841.20
  • Cisco NIM-4G-LTE-VZ Wireless Module

    Key FeaturesManufacturer Part Number: NIM-4G-LTE-VZHost Interface: Mini PCIDevice Supported: RouterLimited Warranty: 90 DayOverviewCisco LTE 2.0 4G NIM for Sprint (NIM-4G-LTE-ST) and Cisco LTE 2.0 4G NIM for Verizon (NIM-4G-LTE-VZ): Multimode LTEs for carriers that operate LTE on 700-MHz (band 13), 1700- or 2100-MHz (band 4 AWS), or extended PCS 1900-MHz (band 25); the multimode NIMs are backward-compatible with EVDO A/CDMA 1X BC0, BC1, and BC10

    $840.59
  • Cisco NIM-4G-LTE-LA= Wireless Module

    Key FeaturesManufacturer Part Number: NIM-4G-LTE-LA=Device Supported: Router

    $840.30
  • Cisco EHWIC-4G-LTE-AT 4G LTE WWAN EHWIC for ISR G2

    Key FeaturesManufacturer Part Number: EHWIC-4G-LTE-ATHost Interface: USBHeight: 0.8″Width: 3.1″Depth: 4.9″Weight (Approximate): 5.20 ozLimited Warranty: 90 DayOverviewThe Cisco 4G LTE WWAN EHWICs are tightly integrated with the services provided on the award-winning Cisco ISR G2 devices, which deliver secure data, voice, video, and mobility services. The Cisco 4G LTE WWAN EHWICs are supported on the modular Cisco 1900, 2900, and 3900 Series ISR G2 devices. Enterprises are looking for ways to reduce deployment time, enable comprehensive media services, increase revenue, and improve business continuity. The Cisco 4G LTE WWAN EHWICs, when coupled with a service provider’s wireless data plan, provide a rapidly deployable, high-bandwidth, reliable, and secure solution for branch offices and remote sites. With 4G LTE data rates, the Cisco 4G LTE WWAN EHWICs offer a primary WAN link solution capable of running comprehensive branch-office services, including voice and video services.

    $812.00
  • Cisco EHWIC-4G-LTE-GB= Wireless Module

    Key FeaturesManufacturer Part Number: EHWIC-4G-LTE-GB=Height: 0.8″Width: 3.1″Depth: 4.9″Weight (Approximate): 5.20 oz

    $811.62
  • Cisco EHWIC-4G-LTE-VZ 4G LTE WWAN EHWIC for ISR G2

    Key FeaturesManufacturer Part Number: EHWIC-4G-LTE-VZHost Interface: USBHeight: 0.8″Width: 3.1″Depth: 4.9″Weight (Approximate): 5.20 ozLimited Warranty: 90 DayOverview4G LTE is being used to provide both primary connectivity and network resiliency for business continuity. With greater agility and speed-to-deployment than wired solutions, 4G LTE reduces network cost and complexity while maintaining ROI. Practical applications of 4G LTE for distributed enterprises such as parallel networks, primary connection, failover, in-vehicle, network convergence, and wireless WAN diversity. The 4G LTE EHWICs with ISR G2 is the industry leader to bring enterprise grade wireline like functionality such as Quality of Service (QoS) for cellular, Multi-VRF for cellular and Unified Communications solutions over LTE.

    $811.62