• Eaton 124100026-002 Parallel Tie Cabinet

    Key FeaturesManufacturer Part Number: 124100026-002Form Factor: Wall MountableHeight: 57.1″Width: 24″Depth: 11.3″Weight (Approximate): 235.90 lbCompatibility: Eaton 9395 UPS

    $4,990.51
  • Pelco UDI5000-MTRX-US Endura UDI5000-MTRX Universal Device Interface

    Key FeaturesManufacturer Part Number: UDI5000-MTRX-USColor: Blue – IndicatorGreen – IndicatorAmber – IndicatorRed – IndicatorBlack Matte – ChassisGray Metallic – Front PanelMaterial: Steel – CabinetForm Factor: DesktopRack-mountableHeight: 1.7″Width: 8.5″Length: 12.3″Weight (Approximate): 6.61 lbPackage Contents: Endura UDI5000-MTRX Universal Device Interface 1 x Power Cord Application/Usage: IP CameraVideo ManagementPackage Contents Endura UDI5000-MTRX Universal Device Interface 1 x Power Cord OverviewThe UDI5000-MTRX provides users with a powerful means by which to leverage investments in legacy analog systems and integrations, while affording customers the benefits of today’s IP and megapixel camera technologies. The UDI5000-MTRX supports three operating modes: ASCII mode, Matrix Digital Decoder mode (MDD), and Virtual Matrix mode (V9700). In ASCII mode, third-party systems interface with Endura reg; utilizing the Pelco ASCII protocol. MDD mode processes commands from Pelco’s CM9700 matrix to access and pull live and recorded Endura video onto matrix monitors through a network decoder and a third-party video down converter. V9700 mode makes use of familiar CM9760 keyboards to control Endura devices and monitors, and takes full advantage of megapixel and HD camera technology advancements.ASCII Protocol Management When operating in ASCII mode, the UDI5000-MTRX allows third-party systems that integrated with the analog matrix through the Pelco ASCII protocol to work with Endura. The UDI5000-MTRX in ASCII mode presents 1,024 virtual alarms that can be configured in Endura for scripted responses to alarms or to convert ASCII switching commands to Endura software commands, allowing ASCII-driven switching of cameras onto Endura monitors.V9700 Virtual Matrix Mode In V9700 mode, the UDI5000-MTRX partially simulates a Pelco CM9780 analog matrix. A traditional PSM file is loaded onto the UDI5000-MTRX, which also processes Pelco P protocol commands from CM9760 keyboards and CM9760 alarm interface units connected through third-party serial to ethernet converters. While operating in V9700 mode, security administrators can continue leveraging most standard security operating procedures developed around analog matrix switches but in a virtual matrix environment. In addition, operators with previous experience using the CM9760-KBD keyboard can leverage their past experience and training when switching to a virtual matrix implementation. The V9700 mode supports Satellite Matrix Functionality (SMF) through the CM9700-NIU, thus allowing the Endura system to extend the useful life of existing analog matrix installations. When configured for V9700-SMF, CM9700 analog video can be converted and displayed on Endura digital monitors, and digital video from the Endura system can be converted and displayed on V9700 analog monitors. Matrix operators can have access to Endura cameras on matrix monitors, and the ability to call up and switch matrix cameras and IP cameras onto Endura decoder monitors through the CM9760-KBD.Matrix Digital Decoder Mode In MDD mode, the UDI5000-MTRX bridges Endura products to the CM9700 Series matrix system (using 9.03.012 software or later versions). Adding the UDI5000-MTRX with a NET5402R-HD to a matrix system allows security professionals to leverage the digital advantages of Endura with their tried and true CM9700 Series matrix system. This allows users to continue viewing live analog video through the matrix while viewing digital live or recorded video from the Endura system through the NET5402R-HD high definition digital decoder connected as an input on the matrix through a third-party video down converter.

    $1,785.43
  • Bosch LBB199000 LBB 1990/00 Plena Voice Alarm Controller

    Key FeaturesManufacturer Part Number: LBB199000Color: CharcoalForm Factor: Rack-mountableHeight: 5.7″Width: 16.9″Depth: 14.6″Weight (Approximate): 33.07 lbPackage Contents: LBB 1990/00 Voice Alarm Controller 1 x Power cord 1 x Set of 19″ mounting Brackets 1 x Safety Instructions 1 x USB Cable Application/Usage: Alarm SystemPackage Contents LBB 1990/00 Voice Alarm Controller 1 x Power cord 1 x Set of 19″ mounting Brackets 1 x Safety Instructions 1 x USB Cable OverviewFully supervised main control unit for Plena Voice Alarm System applications, built-in 240 W amplifier.

    $1,578.42
  • Bosch LTC8782/60-30 LTC 8782/60-30 Protocol Converter

    Key FeaturesManufacturer Part Number: LTC8782/60-30Color: BlackHeight: 1.6″Width: 0.6″Depth: 0.6″Weight (Approximate): 1.54 lbPackage Contents: LTC 8782/60-30 Protocol ConverterRack-mount Hardware KitPower Supply TC120PSPlastic BezelInstructions for UseCountry of Origin: United StatesPackage ContentsLTC 8782/60-30 Protocol ConverterRack-mount Hardware KitPower Supply TC120PSPlastic BezelInstructions for UseOverviewThe LTC 8782 Series Code Translators are accessory units that convert Biphase code to other manufactures’ control codes, or converts other manufactures’ codes to Biphase. Many of the most popular protocol codes are supported, including Pelco, Vicon, American Dynamics, Sensormatic, Kalatel, Diamond Electronics, and Javelin.

    $1,114.02
  • RTS DSI 2008 Digital System-to-System Adapter

    Key FeaturesManufacturer Part Number: DSI 2008Color: Gray – BodyForm Factor: DesktopHeight: 1.8″Width: 8.2″Depth: 8″Weight (Approximate): 2.91 lbApplication/Usage: Intercom SystemCompatibility: Compatible Two=Wire intercom systems include RTS TW, Audiocom, and Clear-Com. Compatible with Four-Wire intercom systems. An internal call signal option board is also available for the DSI-2008. This option board provides call signal capability with any of the two-wire systems listed above. The output can also be directly connected to an ADAM, ADAM-CS, CRONUS, or ZEUS GPI port. No external circuitry is required. With features like digital signal processing, peak-reading level meters and optional call signal interfacing, the DSI-2008 Dual Digital Hybrid assures ease of setup and maximum transparency between intercom systems.OverviewTwo Independent HybridsAutomatic NullingPeak Reading Level MetersDirect ADAM/ZEUS Audio ConnectionTransformer IsolatedCall Signal OptionHalf-Rack Wide, 1 RU HighUniversal Power Pack

    $1,075.66
  • Bosch PVA-4R24 PAVIRO Router

    Key FeaturesManufacturer Part Number: PVA-4R24Height: 3.5″Width: 19″Depth: 14.8″Weight (Approximate): 18.08 lbPackage Contents: PAVIRO Router 1 x Euroblock Connector 2-pole (Phoenix, PC 5/2-STF-7,62, 1975697, F.01U.108.398) for 24 V DC 4 x Euroblock Connector 6-pole (Phoenix, MC 1,5/6-ST-3,81,1827745, F.01U.104.179) for Audio Inputs 8 x Euroblock Connector 10-pole (Phoenix, MC 1,5/10-STF-3,81, 1827787, F.01U.301.445) for Control Inputs or Outputs 4 x Euroblock Connector 12-pole (Phoenix, MC 1,5/12-STF-3,81, 1827800, F.01U.108.397) for Audio Outputs 4 x Foot Stand (self-adhesive) 1 x Operation Manual 1 x Important Safety Instructions Package Contents PAVIRO Router 1 x Euroblock Connector 2-pole (Phoenix, PC 5/2-STF-7,62, 1975697, F.01U.108.398) for 24 V DC 4 x Euroblock Connector 6-pole (Phoenix, MC 1,5/6-ST-3,81,1827745, F.01U.104.179) for Audio Inputs 8 x Euroblock Connector 10-pole (Phoenix, MC 1,5/10-STF-3,81, 1827787, F.01U.301.445) for Control Inputs or Outputs 4 x Euroblock Connector 12-pole (Phoenix, MC 1,5/12-STF-3,81, 1827800, F.01U.108.397) for Audio Outputs 4 x Foot Stand (self-adhesive) 1 x Operation Manual 1 x Important Safety Instructions OverviewThe PVA-4R24 24 Zone Router is a zone extension for the PAVIRO system. The PVA-4R24 adds 24 zones, 20 GPIs, 24 GPOs and 2 control relays to the system and is controlled and supervised via the CAN bus by the PVA-4CR12 (Controller). Up to 20 external routers can be connected to one controller. One router can handle up to 4000 W speaker load. The maximum load of one zone is 500 W. The zone indicator lights on the front indicate the current status of every zone: ? Green: Zone in use for non emergency purpose ? Red: Zone in use for emergency purpose ? Yellow: Zone fault detected ? Off: Zone in idle condition

    $968.94
  • AXIS 01964-004 W800 System Controller

    Key FeaturesManufacturer Part Number: 01964-004Color: BlackMaterial: Aluminum – CasingPlastic – CasingForm Factor: Bracket MountHeight: 2.1″Width: 7.1″Length: 7.1″Weight (Approximate): 1.69 lbApplication/Usage: CameraDocking StationCompatibility: Axis Products: External RFID Card Reader 125 kHz + 13.56 MHz with NFC (USB) W100 Body Worn Camera W700 Docking Station 1-bay W701 Docking Station 8-bay Limited Warranty: 3 YearOverviewAXIS W800 System Controller is a standalone unit, which makes it exceptionally easy and cost-effective to add more docking stations and cameras whenever you want. Cost-effective and scalable AXIS W800 System Controller makes adding new cameras and docking stations cost-effective and easy. Most system controllers for body worn systems are built into camera docking stations. This means every single docking station contains a relatively expensive and sensitive component – the system controller. And every time you add new cameras to your system or need to replace a docking station, you’re paying for a new system controller. But AXIS W800 System Controller is different. Because it’s a standalone unit, one AXIS W800 System Controller supports up to five docking stations and 40 cameras. A single interface. Fast offloading AXIS W800 System Controller provides a single integration and management point for your body worn solution. By linking multiple controllers, you can easily manage any number of cameras via one interface. AXIS W800 System Controller supports fast, reliable video offloading (100Mbit per camera). So your cameras are ready to use again right away.

    $937.60
  • Altronix EBRIDGE8E Eight (8) Port Managed EoC Receiver with Integral PoE+ Switch (25Mbps)

    Key FeaturesManufacturer Part Number: EBRIDGE8EColor: Green – LEDYellow – LEDBlue – LEDHeight: 0.6″Width: 19.1″Depth: 8.5″Weight (Approximate): 6 lbApplication/Usage: CameraCompatibility: Altronix Ethernet over Coax Transceiver: eBridge1PCTX eBridge1ST Country of Origin: United StatesLimited Warranty: LifetimeOverviewThe eBridge8E is an all-in-one head-end solution for upgrading coax to IP that combines a PoE+ switch and EoC Receiver into a single integrated unit for upgrading existing coax infrastructure and deploying the latest IP devices. This 8-Port Managed EoC Receiver with Integral PoE+ switch provides 30W full power per port (240W max). Features also include an integral battery charger for applications requiring backup and embedded LINQ Technology to monitor, control and report power and diagnostics from anywhere. Applications: Eliminates the costs and labor associated with installing new network cabling. Retrofit digital IP cameras in an analog CCTV installation. Works with Megapixel, HD720, HD1080 VGA (SD) cameras (see note, pg. 2). Extend Network link distance in an industrial environment. Upgrade deployed CCTV Coax to a digital network for Retail, Casinos, Airports, Schools, Hospitals, etc.

    $911.67
  • Altronix EBRIDGE800PCRM Eight (8) Port IP and PoE+ Over Coax Receiver

    Key FeaturesManufacturer Part Number: EBRIDGE800PCRMHeight: 1.6″Width: 19.1″Depth: 8.5″Weight (Approximate): 5.80 lbApplication/Usage: Video Surveillance SystemEnvironmentally Friendly: YesEnvironmental Certification: RoHSLimited Warranty: LifetimeOverviewThe eBridge800PCRM and eBridge100TM are CAT5e to Coax cable Ethernet adapters/Media converters that deliver data and power over the coax cable in a PoE+ compliant format. The paired set enables fast 100Base-T Full Duplex Ethernet digital communication to be transmitted over Coax cable. The eBridge800PCRM eight (8) port receiver is powered by any UL Listed PoE midspan or endspan product, such as a NetWay8M or NetWay16M, and pass its power over the coax to the eBridge100TM. This enables the eBridge800PCRM to be used in a managed manner, allowing for remote camera reset. The eBridge100TM in turn passes PoE+ compliant power to a PoE enabled camera or IP device. These plug and play units facilitate system upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling. In addition, data transmission and power over the Coax is possible up to 300m in comparison to 100m Ethernet maximum distance. A maximum range from head end to the PoE camera/device is 500m taking into consideration that up to 100m of structured cable may be deployed at each end. Applications: Retrofit digital IP cameras in an analog CCTV installation. Works with Megapixel, HD720, HD1080 and VGA (SD) cameras. Extend Network link distance in an industrial environment. Upgrade deployed CCTV Coax to a digital network in Retail, Hospitality, Arenas, Casinos, Airports, Schools, Hospitals, Transportation, etc.

    $852.77
  • Bosch CCSD-CU CCS 1000 D Control Unit

    Key FeaturesManufacturer Part Number: CCSD-CUColor: Black – TopMatte – TopBlack – BaseMatte – BaseMaterial: Metal – TopMetal – BaseForm Factor: Rack-mountableHeight: 1.8″Width: 17.3″Depth: 7.9″Weight (Approximate): 7.05 lbOverview Plug-and-play functionality for quick and easy connection of up to 80 Discussion Devices Intuitive web browser interface control for advanced configuration and control Built-in MP3 recorder with internal memory and USB recording Built-in Digital Acoustic Feedback Suppression (DAFS) for ensuring superior speech intelligibility Native support for automatic HD camera control

    $850.47
  • Schneider Electric UDI5000-CAM-US Endura UDI5000-CAM Universal Device Interface

    Key FeaturesManufacturer Part Number: UDI5000-CAM-USColor: Blue – IndicatorGreen – IndicatorAmber – IndicatorRed – IndicatorBlack Matte – ChassisGray Metallic – Front PanelMaterial: Steel – CabinetForm Factor: Rack-mountableDesktopHeight: 1.7″Width: 8.5″Depth: 12.3″Weight (Approximate): 6.60 lbPackage Contents: Endura UDI5000-CAM Universal Device Interface 2 x Power Cords Application/Usage: Video Surveillance SystemIP CameraPackage Contents Endura UDI5000-CAM Universal Device Interface 2 x Power Cords OverviewThe UDI5000-CAM universal device interface is designed to allow third-party IP cameras to easily and transparently interface to the Endura reg; system. With the proliferation of IP camera technology, a great deal of variability exists between IP camera vendors in terms of supported protocols for streaming and command and control. While efforts are underway to create an industry standard, each vendor has and may continue to have several disparate protocols and drivers that their family of IP cameras support. The UDI5000-CAM provides an efficient way to normalize disparate drivers and protocols into a cohesive set that is compatible with Endura and the rest of Pelco’s IP video surveillance portfolio.Protocol Conversion and Stream Management The UDI5000-CAM can easily accommodate camera streams that use HTTP polling, TCP, RTP, or RTSP protocols. Regardless of the streaming protocol the camera uses, the UDI5000-CAM converts the transmitted stream to an RTP header that is RFC1889/RFC3550-compliant for use by Endura. Since Endura uses information such as the source time stamp placed in the user data section of the transmission packet, the UDI5000-CAM will inject this information if it is missing from the camera. And if the camera does not support multiple outgoing streams or multicast streaming, the UDI5000-CAM multiplexes the single stream into streams that can be used by an unlimited number of viewers and recorders. The UDI5000-CAM converts command and control protocols used by the IP cameras into the SOAP/XML protocol used by Endura for camera control.Convenient Scalability and Packaging Endura’s promise of unlimited scalability is extended to the use of third-party IP cameras through the UDI5000-CAM. Each UDI5000-CAM can accommodate up to 16 standard resolution cameras or up to 8 megapixel cameras from most manufacturers. Any combination of camera type and manufacturer is also supported. The built-in bandwidth monitor allows the administrator to maximize the number and type of cameras that each UDI5000-CAM can accommodate. To provide unrestricted scalability, each UDI5000-CAM is an independent server that can run multiple concurrent disparate drivers and normalization routines. This capacity virtually eliminates undue load on other Endura servers and components.The UDI5000-CAM server is a half-width, 1 RU server. The compact size allows for two UDI5000-CAMs to be rack mounted next to each other in just 1 RU of space using the optional rack mount kit. Network Administration and Upgradeability The UDI5000-CAM supports Single Network Management Protocol (SNMP) monitoring and traps along with Endura diagnostic monitoring. As such, health status information is available through the Endura workstation or an external SNMP monitoring application. The UDI5000-CAM complies with Endura’s firmware upgrade scheme, allowing administrators to easily push out updated drivers and other utilities over the network as they become available from Pelco.

    $811.60
  • ComNet FDC80NLTS1 FDC80 Series 8-Channel Supervised Contact Closure

    Key FeaturesManufacturer Part Number: FDC80NLTS1Form Factor: Wall MountableRack-mountableHeight: 1.1″Width: 5.3″Depth: 6.1″Package Contents: FDC80 Series 8-Channel Supervised Contact ClosurePower SupplyApplication/Usage: Fire AlarmGate ControlEnvironmental Control SystemIntrusion Detection SystemEnvironmentally Friendly: YesEnvironmental Certification: RoHSWEEECountry of Origin: United StatesLimited Warranty: LifetimePackage ContentsFDC80 Series 8-Channel Supervised Contact ClosurePower SupplyOverviewThe ComNet trade; FDC80 Series contact closure transmitter and receiver units provide transmission of up to eight independent supervised or unsupervised dry switch or relay contact closures over a single optical fiber, or any two-wire RS-485 copper circuit. Microprocessor-based logic transmits the contact closure information in packets that are ordered and encoded, ensuring extremely robust and reliable transmission. Packets that are garbled, or packets out of sequence with transmission bit errors will not cause random changes of state in the FDC80R receiver unit relays. The supervising function in the FDC80T transmitter allows for the detection of short and open circuit conditions, and normally open or normally closed contact inputs are supported. System faults are displayed via LED status indicators, and user-programmable summary fault alarm contacts are triggered in the FDC80R receiver unit. The FDC80R receiver is offered in both latching and non-latching relay configurations. External series and shunt resistors are included for each of the 8 contact input channels, for contact supervision. Packaged in the exclusive ComNet ComFit housing, these units may be either wall or rack-mounted, or may be DIN-Rail mounted by the addition of model DINBKT1 adaptor plate. Fully compliant with the requirements of NEMA TS-1/TS-2, these industrially-hardened units are designed for use in virtually any out-of-plant environment.

    $776.13