HPE 669281-001 Dual Port 10Gb Ethernet 560FLR-SFP+ PCI Express 2.0 x8 Network Adapter for ProLiant Generation8 Generation9 Generation10 Servers (3 Years Warranty)
The HPE Ethernet 10Gb 2-port 560 FLR-SFP+ FlexibleLOM adapter features low cost, low power dual port PCIe v2.0 x8 lane adapter designed for use in HPE ProLiant Gen8 or higher Rack and scalable servers. The HPE 560FLR-SFP+ addresses the demanding needs of the next-generation data center by providing unmatched features for virtualization and scalability to keep up with the HPE ProLiant Gen8 or higher server platform, with the proven and reliable performance HPE customers have come to expect. The HPE 560FLR-SFP+ adapter enables connections with Direct Attach Copper cables as well as SR fiber optic modules. The HPE 560FLR-SFP+ supports high performance networking features such as VLAN tagging, low latency interrupts, TCP and UDP checksum offloading, MSI-X, NIC teaming (bonding), Receive Side Scaling (RSS), WOL, and jumbo frames.
Dual-port 10 Gb Ethernet PCIe Gen 2.0, x8 Lane Adapter Designed for Maximum Network Performance.20 Gb/s full duplex Ethernet transfer rate per port (40 Gb/s aggregate) with SFP+ cages allows use of Direct Attach copper and SR fiber optic modules. Intel Virtualization Technology for Connectivity (VT-c) with VMDq and SR-IOV supports VMware NetQueue and Microsoft VMQ helping to meet the performance demands of consolidated virtual workloads. Supports Wake-on-LAN (WOL) at 1Gb and has PXE , MSI-X support, Teaming, and IPv6. Adapter supports Hewlett Packard Enterprise Sea of Sensors 3D Technology.
The HPE 669281-001 Ethernet 10Gb dual port 560FLR-SFP+ FlexibleLOM adapter features the latest generation 10 GbE Intel 82599 Controller. The HPE 560FLR-SFP+ is a low cost, low power dual port PCIe v2.0 x8 lane adapter designed for use in HPE ProLiant Gen8 or higher Rack and scalable servers. The HPE 560FLR-SFP+ addresses the demanding needs of the next-generation data center by providing unmatched features for virtualization, scalability to keep up with the HPE ProLiant Gen8 or higher server platform, with proven and reliable performance HPE customers have come to expect. The HPE 560FLR-SFP+ adapter enables connections with Direct Attach Copper cables as well as SR fiber optic modules. The HPE 560FLR-SFP+ supports high performance networking features such as VLAN tagging, Low latency interrupts, TCP and UDP checksum offloading, MSI-X, NIC teaming (bonding), Receive Side Scaling (RSS), WOL, jumbo frames, PXE boot and virtualization features and is SR-IOV ready. This Dual Port Network Adapter comes with 3 Years Warranty.
Brand: HPE MPN: 669281-001
Option Part Number: 665243-B21Spare Part Number: 669281-001
Device Type: Network AdapterForm Factor: Plug-In CardInterface (Bus) Type: PCI Express 2.0 x8
Ports: 10Gb Ethernet x 2Connectivity Technology: WiredData Link Protocol: 10 GigEData Transfer Rate: 10 GbpsRemote Management Protocol: SNMPStatus Indicators: Port status, link activityFeatures: Wake on LAN (WOL), Jumbo Frames support, teaming support, PXE support, Large Send Offload (LSO), Receive Side Scaling (RSS), TCP Segmentation Offload (TSO)
Processor / Memory
Processor1: – Intel
Expansion / Connectivity
Interfaces: 2 x 10Gb EthernetCompatible Slots: 1 x FlexibleLOM
Compliant Standards: IEEE 802.3, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.3ae, IEEE 802.1ab (LLDP), IEEE 802.1Qau, UL, BSMI, BSMI CNS 13438 Class A, ICES-003, EN55024, EN55022 Class A, WEEE, FCC Part 15 A, VCCI V-3 Class A ITE, EN 61000-3-2:2006, EN 61000-3-3:2008
Software / System Requirements
OS Required: SunSoft Solaris 10, SuSE Linux Enterprise Server 11, SuSE Linux Enterprise Server 10, Microsoft Windows HPC Server 2008, Red Hat Enterprise Linux 6, Microsoft Windows Server 2008 (32/64-bits), Red Hat Enterprise Linux 5.x, VMware ESXi 4.1, VMware ESXi 5, VMware ESX, Microsoft Windows Server 2008 R2 (32/64-bits), Microsoft Windows Server 2012 (32/64-bits)
Min Operating Temperature: 32 °FMax Operating Temperature: 131 °FHumidity Range Operating: 10 – 90% (non-condensing)
HPE Apollo: 4520 Gen9
HPE ProLiant DL Series: DL160 Gen8, DL160 Gen8 Base, DL160 Gen8 Entry, DL160 Gen8 Performance, DL180 Gen9, DL180 Gen9 Base, DL180 Gen9 Entry, DL180 Gen9 Storage, DL20 Gen9, DL20 Gen9 Entry, DL20 Gen9 Performance, DL20 Gen9 Solution, DL360p Gen8, DL360p Gen8 Base, DL360p Gen8 CMS, DL360p Gen8 Entry, DL360p Gen8 High Performance, DL360p Gen8 Special Server, DL380 Gen9 High Performance, DL380p Gen8, DL380p Gen8 Base, DL380p Gen8 Entry, DL380p Gen8 High Performance, DL380p Gen8 Special, DL385p Gen8, DL385p Gen8 Dedicated Workload, DL385p Gen8 Entry, DL385p Gen8 Maximized Consolidation, DL385p Gen8 Storage, DL385p Gen8 Storage Centric, DL560 Gen8, DL560 Gen8 Base, DL560 Gen8 Entry, DL560 Gen8 Performance, DL560 Gen9, DL560 Gen9 Base, DL560 Gen9 Entry, DL560 Gen9 Performance
HPE ProLiant SL Series: SL230s Gen8 1U Left Half Width Tray, SL230s Gen8 1U Right Half Width Tray, SL230s Gen8 Base 1U Left Tray Server, SL230s Gen8 Base 1U Right Tray Server, SL250s Gen8 2U Left Half Width Tray, SL250s Gen8 2U PCIe Gen3 Left Tray, SL250s Gen8 2U PCIe Gen3 Right Tray, SL250s Gen8 2U Right Half Width Tray, SL250s Gen8 Base 2U Left Half Width Tray, SL250s Gen8 Base 2U Left Tray Server, SL250s Gen8 Base 2U Right Half Width Tray, SL250s Gen8 Base 2U Right Tray Server, SL270s Gen8 1U Left Half Width Tray, SL270s Gen8 1U Right Half Width Tray, SL270s Gen8 Base 4U Left Half Width Tray, SL270s Gen8 Base 4U Right Half Width Tray, SL270s Gen8 SE 4U Left Tray, SL270s Gen8 SE 4U Right Tray
HPE ProLiant XL Series: XL170r Gen9, XL190r Gen9, XL230a Gen9 Compute Tray, XL230a Gen9 Compute Tray (12G), XL230a Gen9 Compute Tray (6G), XL230a Gen9 NHPE Compute Tray (12G)
HPE SimpliVity 380 Gen9 Node
HPE StoreEasy 1850, 3850 Gateway Single Node
Contact us if you have any question about this product to verify this models compatibility with your current server or storage array.
View AllClose 3 Years Warranty Brand: HPEMPN: 669282-001
Option Part Number: 665246-B21Spare Part Number: 669282-001
Device Type: Network Adapter – Dual PortModel: HPE Ethernet 10Gb 2-Port 560M AdapterForm Factor: Type A Mezzanine CardInterface (Bus) Type: PCI Express 2.0 (Gen 2) x8
Networking / Technical Specifications
Network Processor: Intel® 82599 ControllerData Rate: Two ports, each at 20 Gbps bi-directional; 40 Gbps aggregate bi-directional theoretical bandwidthConnectivity Technology: WiredData Link Protocol: GigE, 10 GigEData Transfer Rate: 10 GbpsFeatures: Wake on LAN (WOL), Quality of Service (QoS), Jumbo Frames support, Virtual Machine Device Queues (VMDq), Teaming Support, PXE Support, Receive Side Scaling (RSS), Single Root I/O Virtualization (SR-IOV), Tagged VLAN, Extended Message-Signaled Interrupts (MSI-X)
IEEE Compliance: 802.3, 802.1ab, 802.3x, 802.3ad, 802.3p/802.1q, 802.3ae, 802.1qau, 802.3ap, 802.1as, 802.1qaz, 802.1QbbRoHS Compliance 6 of 6
Processor: 1 – Intel® 82599 Controller
Software / System Requirements
Operating System and Virtualization Support: Microsoft Windows Server 2012; Microsoft Windows Server 2008 SP2, R2 (x86, x64); Microsoft Windows Hyper-V, R2 SP1; Red Hat Enterprise Linux (RHEL) 5.7, 6.1 (x86, EM64T/AMD64); SUSE Linux Enterprise Server (SLES) (x86, EM64T/AMD64); VMware ESX/ESXi 4.1u2, ESXi 5.0u1, ESXi 5.1.; vSphere 6.5; Citrix XenServer 6.0; Solaris 10 (x86, x64)
Power Consumption: 6.5 Watt Maximum
Min Operating Temperature: 32 °F (0°C)Max Operating Temperature: 131 °F (55°C)Operating Humidity Range: 10 – 90% (Non-Condensing)
Compatible Slots: 1 x Expansion Slot
Product Dimensions & Weight
Width: 8.25 inchHeight: 2.50 inchDepth: 9.78 inchWeight: 1.00 lbs
USA: FCC (CFR 47 part 15) and UL 60950Canada: ICES-003 and CSA60950Japan: VCCIEuropean Union: EN55022:1998 (CISPR 22), EN55024:1998 and IEC60950:1999 (EN60950:2000)Australia: ACA, AS/NZS3548/EN55022:1998, EN55024:1998Korea: MIC (RRL), EMC Registration
NOTE: The HPE 560M on each server blade connects to a 10Gb interconnect in bays 3-8 (HPE BladeSystem C7000 Enclosure) or bays 2-4 (HPE BladeSystem C3000 Enclosure).
NOTE: This adapter requires a minimum of 2 GB of server memory.
HPE ProLiant BL Series: BL460c Gen9 Server Blade, BL660c Gen9 Server Blade, BL460c Gen10 Server Blade
HPE ProLiant WS Series: WS460c Gen9 Server Blade
NOTE: Thermal reporting for Gen10 is in server design not in adapters.
HPE Blade Switch: 6120XG Blade Switch, 6120G/XG Blade Switch, 6125G/XG Ethernet Blade Switch, 6125XLG Ethernet Blade Switch, 6127XLG Ethernet Blade Switch and GbE2c Layer 2/3 Ethernet Blade Switch
HPE Ethernet BL-c Switch: 1:10Gb Ethernet BL-c Switch
Cisco Catalyst Blade Switch for HPE: 3120G Blade Switch, 3120X Blade Switch and 3020 Blade Switch
Cisco Fabric Extender for HPE: B22HP
HPE Pass Thru Module: 10GbE Pass-Thru Module and 1GbE Pass Thru Module
NOTE: 10GbE converged connectivity is supported in all HPE 6120XG, HPE 6125XG series switches, Cisco B22 Fabric Extender and HPE 10GbE Pass-Thru modules. All other supported interconnects and switches are limited to 1GbE per connection for Ethernet-ony traffic.
Dual-port 10Gb Ethernet PCIe v2.0 (x8) Mezzanine Adapter Designed for Maximum Network Performance.SR-IOV ready enhanced virtualization capabilities support VMware NetQueue and Microsoft VMQ , Intel VT-c helps meets the performance demands of consolidated virtual workloads.New I/O technologies reduce system power, increase I/O performance and reduce I/O latency. Supports Precision Time Stamping protocol (IEEE 1588 & 802.1AS).Supports Wake-on-LAN (WOL) at 1 Gb, has PXE, MSI-X support, Teaming, and IPv6.Adapter supports HPE Sea of Sensors 3D Technology.
High Performance and Low power characteristicsUp to 40 Gb/s bi-directional line ratesEnhanced virtualization features with VMDq and SR-IOV supporting Microsoft VMQ, VMware NetQueue, Xen and Linux environmentsLess than 6.5 watts power dissipation
At a Glance Features- Industry-leading throughput and latency performance- Supports HPE ProLiant Gen8 BL-c servers- Type A mezzanine adapter- Dual 10 Gb ports provide up to 40 Gb bi-directional per adapter- Hardware and software acceleration and intelligent offloads for stateless TCP/IP Jumbo frames support- Supports receive-side scaling (RSS) for efficient distribution of network receive processing across multiple CPUs in multiprocessor systems- Supports the Preboot eXecution Environment (PXE)- Supports Wake-on-LAN (at 1Gb)NOTE: Wake-on-LAN is supported only on Port1 from system power state S5
Throughput Theoretical BandwidthThis adapter delivers 20 Gb/s bi-directional Ethernet transfer rate per port (40 Gb/s per adapter), providing the network performance needed to improve response times and alleviate bottlenecks.
802.1p QoS TaggingIEEE quality of service (QoS) 802.1p tagging allows the adapter to mark or tag frames with a priority level across a QoS-aware network for improved traffic flow.
802.1Q VLANsIEEE 802.1Q virtual local area network (VLAN) protocol allows each physical port of this adapter to be separated into multiple virtual NICs for added network segmentation and enhanced security and performance. VLANs increase security by isolating traffic between users. Limiting the broadcast traffic to within the same VLAN domain also improves performance.
Active Health SystemSupports HPE Active Health System – monitors and records changes in the server hardware and configuration enabling customers to have accurate information that will assist in diagnosing problems and delivering rapid resolution when server failures occur.
DPDKThis adapter supports DPDK with benefit for packet processing acceleration and use in NFV deployments.
HPE Sea Of Sensors 3DSupport for the HPE Sea of Sensors which is a collection of 32 sensors that automatically track thermal activity heat – across the server. When temperatures get too high, sensors can initiate fans and make other adjustments to reduce energy usage. A significant improvement lies in the ability to apply fan speed increases only to the portion of the system that is rising in temperature, rather than all six fans in unison, which reduces the amount of energy used for cooling.
Interrupt CoalescingInterrupt coalescing (interrupt moderation) groups multiple packets, thereby reducing the number of interrupts sent to the host. This process optimizes host efficiency, leaving the CPU available for other duties.
Jumbo FramesThis adapter supports Jumbo Frames (also known as extended frames), permitting up to a 9,500 byte (KB) transmission unit (MTU) when running Ethernet I/O traffic. This is over six times the size of a standard 1500 byte Ethernet frame. With Jumbo Frames, networks can achieve higher throughput performance and greater CPU utilization. These attributes are particularly useful for database transfer and tape backup operations.
Management SupportThis adapter ships with agents that can be managed from HPE Systems Insight Manager or other management application that support SNMP.
Network Adapter TeamingThis adapter support for NIC teaming helps IT administrators increase network fault tolerance and increased network bandwidth, the team of adapters can work together as a single virtual adapter, providing support for several different types of teaming enabling IT administrators to optimize availability, improve performance and help reduce costs.
Optimized for VirtualizationI/O Virtualization support for VMware NetQueue and Microsoft VMQ helps meet the performance demands of consolidated virtual workloads.
Preboot eXecution Environment (PXE)Support for PXE enables automatic deployment of computing resources remotely from anywhere. It allows a new or existing server to boot over the network and download software, including the operating system, from a management/ deployment server at another location on the network.Additionally, PXE enables decentralized software distribution and remote troubleshooting and repairs.
TCP/UDP/IPFor overall improved system response, this adapter supports standard TCP/IP offloading techniques including: TCP/IP, UDP checksum offload (TCO) moves the TCP and IP checksum offloading from the CPU to the network adapter. Large send offload (LSO) or TCP segmentation offload (TSO) allows the TCP segmentation to be handled by the adapter rather than the CPU.
Precision Time Protocol (IEEE 1588 PTP)Synchronization of system clocks throughout a network, achieving clock accuracy in the sub-microsecond range, making it suitable for measurement and control systems.
Contact us if you have any question about this product to verify the compatibility of this model with your current server or storage array.