Description

Description
HPE Procurve J9145A 2910al-24G 24 Port 10/100/1000 + 4 x shared SFP Stackable Rack Mountable Gigabit Ethernet Managed Switch (90 Days Warranty) The HPE 2910al Series is well suited to campus and enterprise networks. Layer 4 prioritization based on TCP/UDP port numbers and rate limiting enhance QoS, and the J9145A’s management features include RMON, XRMON, sFlow, and UDLD. The 2910al Series also utilizes DHCP protection, port security, RADIUS/TACACS+, ACLs, dynamic ARP protection, and MAC address lockout. Rack Mountable managed switch. The HPE J9145A is a part of the HPE 2910al Switch Series. It has 20 auto-sensing 10/100/1000 RJ-45 ports and 4 dual personality SFP ports, and features QoS, jumbo frames, and Layer 2 and 3 support. This is a managed rack-mountable unit with a 2000 entry MAC address table and has 90 Days Warranty. Specifications Brand: HPEMPN: J9145AModel: J9145A General Device Type: Switch – Managed – StackableEnclosure Type: External – 1UFeatures: Flow Control, Auto-Sensing Per Device, DHCP Support, Auto-Negotiation, BOOTP Support, ARP Support, VLAN Support, Auto-Uplink (AUTO MDI/MDI-X), Port Mirroring, Manageable, IPV6 Support, Quality Of Service (QOS), JUMBO FRAMES SUPPORTCompliant Standards: IEEE 802.3, IEEE 802.3U, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3AB, IEEE 802.1P, IEEE 802.3X, IEEE 802.3AD (LACP), IEEE 802.1W, IEEE 802.1X, IEEE 802.1S Networking Ports Qty: 24 X Ethernet 10BASE-T, Ethernet 100BASE-TX, Ethernet 1000BASE-TMax Units in a Stack: 16Data Transfer Rate: 1 GbpsData Link Protocol: Ethernet, Fast Ethernet, Gigabit EthernetRouting Protocol: RIP-1, RIP-2, Static IP RoutingRemote Management Protocol: SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, TELNET, SNMP 3, SNMP 2C, HTTP, SSHConnectivity Technology: WiredCommunication Mode: Half-Duplex, Full-DuplexSwitching Protocol: EthernetSwitching Capacity: 128 GbpsThroughput: 95 MppsMAC Address Table Size: 2K EntriesStatus Indicators: Link Activity, Port Transmission Speed Processors & Memory Processor: 2 X ARM ARM1156T2-S : 515 MHZRAM: 512 MB SDRAMFlash Memory: 1 GB FLASH Expansion & Connectivity Expansion Slots Total (FREE): 4 ( 4 ) X SFP (MINI-GBIC)Interfaces: 24 X Network – Ethernet 10BASE-T/100BASE-TX/1000BASE-T – RJ-45 1 X Management – Console – RJ-45 Power Power Device: Power Supply – InternalVoltage Required: AC 120/230 V ( 50/60 HZ )Power Consumption Operational: 82 WATT Contact us with any questions or to verify this model’s compatibility with your current server or storage array.
View AllClose 90 Days Warranty Brand: HPE Model: J9147A MPN: J9147A General Device Type: Switch – 48 ports – managed – stackableEnclosure Type: Rack-mountable 1USubtype: Gigabit EthernetPorts: 48 x 10/100/1000 + 4 x shared SFPMax Units In A Stack: 16Routing Protocol: RIP-1, RIP-2, static IP routingRemote Management Protocol: SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTPEncryption Algorithm: SSLAuthentication Method: RADIUS, TACACS+, Secure Shell v.2 (SSH2)Features: Flow control, DHCP support, BOOTP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), port mirroring, manageable, IPv6 support, Quality of Service (QoS), Jumbo Frames supportProcessor: 2 x ARM ARM1156T2-S: 515 MHzRAM: 512 MB SDRAMFlash Memory: 4 MB flashStatus Indicators: Port transmission speed, link/activity Technical Specifications Configuration Routing table size: 2000 entriesNetworking Address table size: 16000 entriesManagement features: HPE PCM+; HPE PCM; command-line interface; Web browser; out-of-band management (serial RS-232C)Device management: RFC 1591 DNS (client); HTML and telnet managementGeneral protocols: IEEE 802.1D MAC Bridges; IEEE 802.1p Priority; IEEE 802.1Q VLANs; IEEE 802.1s Multiple Spanning Trees; IEEE 802.1v VLAN classification by Protocol and Port; IEEE 802.1w Rapid Reconfiguration of Spanning Tree; IEEE 802.3ad Link Aggregation Control Protocol (LACP); IEEE 802.3x Flow Control; RFC 768 UDP; RFC 783 TFTP Protocol (revision 2); RFC 792 ICMP; RFC 793 TCP; RFC 826 ARP; RFC 854 TELNET; RFC 868 Time Protocol; RFC 951 BOOTP; RFC 1058 RIPv1; RFC 1350 TFTP Protocol (revision 2); RFC 2030 Simple Network Time Protocol (SNTP) v4; RFC 2131 DHCP; RFC 2453 RIPv2; RFC 3046 DHCP Relay Agent Information Option IP Multicast: RFC 3376 IGMPv3 (host joins only) IPv6: RFC 1981 IPv6 Path MTU Discovery; RFC 2460 IPv6 Specification; RFC 2710 Multicast Listener Discovery (MLD) for IPv6; RFC 2925 Remote Operations MIB (Ping only); RFC 3019 MLDv1 MIB; RFC 3315 DHCPv6 (client only); RFC 3513 IPv6 Addressing Architecture; RFC 3596 DNS Extension for IPv6; RFC 3810 MLDv2 (host joins only); RFC 4022 MIB for TCP; RFC 4113 MIB for UDP; RFC 4251 SSHv6 Architecture; RFC 4252 SSHv6 Authentication; RFC 4253 SSHv6 Transport Layer; RFC 4254 SSHv6 Connection; RFC 4293 MIB for IP; RFC 4419 Key Exchange for SSH; RFC 4443 ICMPv6; RFC 4541 IGMP & MLD Snooping Switch; RFC 4861 IPv6 Neighbor Discovery; RFC 4862 IPv6 Stateless Address Auto-configuration MIBs: RFC 1213 MIB II; RFC 1493 Bridge MIB; RFC 1724 RIPv2 MIB; RFC 2021 RMONv2 MIB; RFC 2613 SMON MIB; RFC 2618 RADIUS Client MIB; RFC 2620 RADIUS Accounting MIB; RFC 2665 Ethernet-Like-MIB; RFC 2668 802.3 MAU MIB; RFC 2674 802.1p and IEEE 802.1Q Bridge MIB; RFC 2737 Entity MIB (Version 2); RFC 2863 The Interfaces Group MIB; RFC 2925 Ping MIB Network management: IEEE 802.1AB Link Layer Discovery Protocol (LLDP); RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9 (events); RFC 3176 sFlow; ANSI/TIA-1057 LLDP Media Endpoint Discovery (LLDP-MED); SNMPv1/v2c/v3; XRMONQoS/Cos: RFC 2474 DiffServ Precedence, including 8 queues/port; RFC 2597 DiffServ Assured Forwarding (AF); RFC 2598 DiffServ Expedited Forwarding (EF); Ingress Rate Limiting Security: IEEE 802.1X Port Based Network Access Control; RFC 1492 TACACS+; RFC 2138 RADIUS Authentication; RFC 2866 RADIUS Accounting; Secure Sockets Layer (SSL)Latency: 1000 Mb Latency: < 2.9 µs (FIFO 64-byte packets); 10 Gbps Latency: < 1.3 µs (FIFO 64-byte packets) Memory and processor Processor: Dual ARM1156T2S @ 515 MHz, 4 MB flash, packet buffer size: 6 MB, 1 GB compact flash, 512 MB SDRAM Performance Throughput: up to 131 million ppsSwitching capacity: 176 Gbps Ports: 44 auto-sensing 10/100/1000 ports(IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T), Media Type: Auto-MDIX, Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only; 4 dual-personality ports, each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a mini-GBIC slot (for use with mini-GBIC transceivers); 1 RJ-45 serial console port; Supports a maximum of 4 10-GbE ports, with optional module Power Power: The switch automatically adjusts to any voltage between 100-127 and 200-240 volts and either 50 or 60 HzPower consumption: 105 WPower consumption (standby): 64 WInput frequency: 50 / 60 HzInput operating current: 2.1 / 1.1 AInput voltage: 100-127 / 200-240 VAC System Form factor: 1U height Environmental information Operating temperature range: 32 to 131°FHeat dissipation: 356 BTU/hr (376 kJ/hr)Acoustic pressure emissions: Power: 53.5 dB, Pressure: 39.4 dB, DIN 45635T.19 per ISO 7779Operating altitude (imperial): up to 10000 ft.Storage humidity: 15 to 95% @ 149°F (65°C) (non-condensing) Compliance information Electromagnetic compatibility: FCC part 15 Class A; EN 55022/CISPR-22 Class A; VCCI Class AImmunity standard: EN 55024, CISPR 24; IEC 61000-4-2; IEC 61000-4-3; IEC 61000-4-4; IEC 61000-4-5; IEC 61000-4-6; IEC 61000-4-8; IEC 61000-4-11; IEC 61000-3-2; IEC 61000-3-3Safety: EN 60950/IEC 60950; CAN/CSA 22.2 No. 60950; EN 60825; UL 60950 Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s Physical information Weight: 11.2 lb.Dimensions (W x D x H): 14.4 x 17.42 x 1.73 in. Legal Disclaimer: The information contained in this document is subject to change with or without notice. Hewlett Packard makes no warranty of any kind with respect to this information. Hewlett Packard specifically disclaims the implied warranty of merchantability and fitness for a particular purpose. Hewlett Packard shall not be liable for any direct, indirect, incidental, consequential, or other damage alleged in connection with the furnishing or use of this information. Contact us if you have any question about this product to verify this model’s compatibility with your current server or storage array.